Firmware for S17 - 85th/s and T17 - 65th/s T17 44t&45w/t • AUTO-TUNE

Тема в разделе "Майнинг (общий раздел)", создана пользователем AntsMiner, 17 фев 2020.

  1. AntsMiner

    AntsMiner новичок

    Antminer S17 and T17 custom firmware!

    If you own a mining farm/hotel or have a large number of S17 or T17 500+ contact me for a better deal and to hear about our partnership program. has developed a firmware for the Antminer S17/S17 Pro and T17 Antminer. You can download and install it on your machine to improve your profits.

    Antminer S17 / T17 Overclocking
    Performance ~+30%
    The ability to downvolt ~ 15-25%
    Antminer S17(normal) to 70-85th/s (~3100-3760w)
    Antminer T17 up to 65th/s (consumption ~ 3000W)

    Antminer T17 Downvolts to 1900w at 42th/s - 45w/th

    (Attention! Firmware is still new, in order to avoid breakdowns it is recommended to increase overclock slowly.)

    Overclocking: over 85th/s with S17 and 65th/s T17!
    ASICboost and autotuning: On all of our versions include auto-tuning frequency to get the best efficiency as well as utilizing ASICboost.
    Decrease Hardware Errors
    No Bmminer
    Immersion-ready/Fan Disable: Support for high-efficiency liquid immersion cooling by disabling the fan in the settings.
    Lower Thermal Threshold: Lowers default overheat protection to ensure machines last longer.
    Full-farm deployment: Send out a configuration file to an unlimited number of miners on the same network. No reboot required!
    Power monitoring: Built-in wattmeter function.
    Search: Find Other Asic on the network.
    Password Change: Ability to mass change passwords and ssh port.
    Multi-ASIC roll-out: Setup one machine and install it on all of them with just 1 click.
    Free – Download and begin using immediately. Small 2.8% fee to keep the project going.
    Supports popular ASICs: Support for all Antminer S17/T17,S9/S9i/S9j models.
    Stable: Automated voltage tuning for best hashboard stability and performance.
    Sleep Mode: Mining can stop and fans drop to normal speed using very little power.
    Asic Virus Scanner: Tool that checks pre-owned asics for night switcher and other variants.
    Easy Uninstallation

    Notice you need to unlock SSH for the S17 and T17 models. Click here for download on app to unlock SSH.

    Notice: When using chip Manual Tune. DO NOT increase chip frequency above 20% of base frequency of board. Just use AutoTune!!!

    Please Take Notice
    As we all should know my now tampering with your machines can damage the machine. Do so at your own risk... But have fun! TO THE MOON

    edit: I have been notified someone is possibly impersonating on telegram.

    Telegram chat for assistance:

    Hi guys.
    I am glad to present the first official release of the Best mining firmware version 1.0.0 for Antminers s17 & T17

    Change log:
    1. General stability.
    2. Correction of profile parameters for S17 / T17.
    3. Improved nicehash support (extranonce subscribe).
    4. Added trigger to disable / enable voltage (cold start).
    5. Added trigger to disable / enable domain unbalance check.
    6. Added the ability of target chip temp (new proprietary and much cooler adjustment method, which significantly reduced fan speed).
    7. Implemented support for a “quiet" start of the miner.
    8. Automatic transfer of the miner to warm-up mode when starting in cold conditions.
    9. Added registration of dead chips during autotune.
    10. Improved and significantly reduced the launch time of the miner.
    11. Added saving chips freq / autotune result for subsequent manual pre-tuning.
    12. Added checking for all types of viruses that we know about today.
    13. All functionality is added to the config multiplier section.
    14. Activated time zone.
    15. Added the estimated power consumption by the miner (electronic wattmeter).
    16. The status of the miner (its API) is available immediately at startup after 15 seconds.
    17. Added The ability to set the critical temperature of the chips to automatically disable the hash board.

    1) The autotune work has been finalized and fully adjusted.
    2) Completely rewritten algorithm for adjusting the voltage of the chips.
    3) Improved method for controlling unbalanced domains.
    4) Adjusted and fully customized profiles.
    5) Added compatibility with BTC Tools version 1.2.6.
    6) Fixed config multiplier with batch propagating workers.
    7) Added pool support for
    Cool Added pool support for
    9) Checked and fixed stability of the pool

    New release, 0.9.8_beta for Antminer S17 & T17 models

    What is done:
    1. General stability
    2. Extended and refactored the main driver.
    3. The next iteration of refinement and improvement of errors (HW)
    4. Hash rate loss on some pools was analyzed and fixed.
    5. Added support for P2P pool.
    6. Activated the multiplier for the distribution of mass batch configs.
    7. Work on with the reading of temperature sensors I2C
    8. Created more than 10 overclocking profiles.
    9. Added autotune!!! (note, autotune results are saved in a separate config, when changing a profile to a new one and returning to the previous profile, a repeated autotune is not required, except for a forced retune by the user).
    After the completion of the tune, “temporarily” changes to the chips in the manual section of gui are not displayed.
    10. Autotune is taken out as a separate log in the profiles section.
    11. Automatic reboot when unbalancing domains to save chips from burnout.
    12. Added manual downgrade of the entire domain.